Profiles
for laminate
Laminate flooring profiles: bridging heights and flooring types
Quick‑Step’s smart profiles cover the floor expansion or make the transition to another floor type fluent. The versatile Incizo profile and the metal profiles can be used for multiple functions. And like all Quick-Step products: they are easy-to-install.
Discover all our profiles
Colour-matched profiles
Metal subprofiles for stairs
Metal finishing profiles
-
Multifunctional Profile Silver
- Multifunctional Profile
- QSPRSILV
- You can use this wear-resistant aluminum profile with a silver tone to bridge height differences from 0 to 12.3 mm. You can place it between two Quick-Step laminate floors or two vinyl floors. Another option is to bridge a height difference between a laminate or vinyl floor and another lower or higher floor. Patent pending.
-
Adapter Profile - Black
- Adapter profile
- SFADPBLACK
- This very slim and elegant profile can be used to make the transition between a higher and a lower floor. Can be used with laminate floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the adapter profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the adapter profile in the subprofile.
-
-
-
-
-
-
-
-
-
-
-
Expansion Profile - Champagne
- Expansion profile
- SFEXPCHAM
- This very slim and elegant profile can be used to cover the expansion joint between 2 floors of the same height e.g. at a door entrance or in a large room/corridor where an expansion joint is required. Can be used with laminate floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the expansion profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the expansion profile in the subprofile.
-
-
-
Expansion Profile - Silver
- Expansion profile
- SFEXPSILV
- This very slim and elegant profile can be used to cover the expansion joint between 2 floors of the same height e.g. at a door entrance or in a large room/corridor where an expansion joint is required. Can be used with laminate floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the expansion profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the expansion profile in the subprofile.
Still got questions?
Need help finishing your project to your satisfaction?
Take a look at our help centre, which contains answers to the most frequently asked questions!