If your room has mouldings or a door opening, we recommend sawing this carefully away at the bottom. This way, you can be assured of a beautifully finished floor.
Place a plank with the decor side facing downwards and your underlay against the moulding, put your multi-tool flat on the plank and saw the bottom part of the moulding off at the correct height. Or use a hand saw.
Sweep up the sawdust and clean the area with a vacuum cleaner. After that, you can slot your plank into the moulding and click it on to the next plank.
Use an end profile near the door opening for a perfect finish.
Please note: the information given on this page solely applies to Quick-Step flexible vinyl floors. For details about the installation of Alpha Vinyl, please check the vinyl installation instructions.
Was this article helpful?
Thank you for your feedback!
Oops. Something went wrong.
An unknown error has occurred. Please try again. If the issue continues, please get in touch.
Related articles
What’s the maximum floor length I can install?
Quick-Step Multifunctional, the finishing profile for your floor
Find a dealer nearby
Whether you’ve already found the perfect flooring or want to explore some more: our vast network of Quick-Step dealers is always close by.