Vinyl flooring and underfloor heating are a match made in heaven, which makes vinyl extremely popular in both renovations and new buildings. All Quick-Step Vinyl floors can be combined with low-temperature underfloor heating or cooling.
Quick-Step Vinyl floors are compatible with low-temperature underfloor heating. This means the maximum contact temperature of the vinyl cannot exceed 27°C. Vinyl floors can only be installed with hot water or electric heating elements that are embedded in the subfloor. New systems such as heating films that are placed onto the subfloor are not suited. When installing Quick-Step Vinyl with underfloor heating, it’s important to pay close attention to the instructions.
When combining a vinyl floor with underfloor heating, you should make sure that the overall thermal resistance does not exceed 0.15m² K/W. The higher the thermal resistance, the longer it will take your floor to warm up and the less efficient your underfloor heating will be. Quick-Step Vinyl floors are perfectly suited for this: Quick-Step Vinyl 4.5mm has a total thermal resistance of 0.015 m²K/W when glued down or 0.025-0.070 m² K/W for ‘floating’ installations with an underlay. In other words: a glued floor transmits heat slightly better. The thermal resistance of Quick-Step Vinyl can be found in the specific guidelines for underfloor heating.
It is important to put an insulating layer below your underfloor heating that insulates more than the vinyl. This way, heat is reflected away from the insulative layer and is conducted through the floor.
Floor cooling follows the same principles as underfloor heating, except it uses cold water instead of hot water. That’s why it is important to have an advanced control and security system to prevent internal condensation when using underfloor cooling. This prevents your floor from sustaining water damage.
Quick-Step Vinyl floors can be installed in two ways: glued down or ‘floating’. The general installation guidelines still apply, unless our specific guidelines for underfloor heating state differently. When in doubt, always check with your dealer.