Humidity can make your laminate floor boards shrink or expand a bit. This fluctuation in humidity levels can cause them to click loose and move, resulting in openings between the boards. Fortunately, you don’t have to remove the entire floor to close these open joints. Using the following step-by-step guide, you can easily fix the problem.
Before you get started, you’ll need a few tools: a hammer, a chisel, a crowbar and a tapping block. Optional: wood glue.
- Take a close look at the open joint and try to determine in which direction the board moved. This is the side where you’ll remove the skirting board.
- Use the chisel and hammer to remove the skirting board on the side the laminate board moved towards.
- Once you’ve removed the baseboard, you’ll see which board came undone. Using the hammer and tapping block, knock the board back in place to close the open juncture. You can use some wood glue in the crack between both boards to make sure it won’t come apart again.
- Glue your skirting board back together and your laminate floor is perfect again.
WATCH THE VIDEO